Shop the S4 range · S4 Chef's Knife, £100
Everything we know about how the S4 knives are made, for anyone who wants the detail. If you just want a sharp knife that stays sharp, the product pages tell you what you need.
Steel
A 10Cr15CoMoV core, clad in 67 layers of Damascus steel. 10Cr15CoMoV is close in composition to Japanese VG-10: around 1% carbon and 15% chromium, with cobalt, molybdenum and vanadium. Every S4 knife uses the same steel, the bread knife and steak knives included. (On our product pages, "10Cr" is short for 10Cr15CoMoV.)
Heat treatment and hardness
Vacuum heat treatment, then a deep freeze, for every knife. Hardness is 61 HRC, measured on a Rockwell tester after heat treatment, every production batch.
Edge
Double bevel, 15° per side, finished by hand, so edges vary very slightly from knife to knife. The bread knife is serrated, at about 30° inclusive. The Season sharpening guide clips to the spine and holds 15°, so you sharpen at the angle the knife was made with.
The chef's knife
- Blade 210mm; overall 339mm; handle 129mm
- Height at the heel 54.5mm
- Thickness at the spine 2.2mm; just behind the edge about 0.2-0.25mm
- Rosewood handle, full tang, triple-riveted
The range
Sizes in mm: overall / blade / handle / blade height, to within 0.5mm.
- Chef's Knife 21cm: 339 / 210 / 129 / 54.5
- Santoku 18cm: 313 / 180 / 133 / 50.5
- Santoku 13cm: 235 / 125 / 110 / 35.8
- Utility Knife 13cm: 245 / 133 / 112 / 50.5
- Bread Knife 23cm: 360 / 228 / 132 / 32.5
- Carving Knife 25cm: 385 / 252.5 / 132.5 / 34.5
- Boning Knife 15cm: 290 / 150 / 140 / 33.5
- Paring Knife 9cm: 200 / 90 / 110 / 23
- Steak Knives, set of 4: each 235 / 125 / 110 / 28.2
The 7 Piece Block Set and 3 Piece Set are made up of the knives above. The scissors in the block set are plain stainless steel and don't share the S4 specification.
Edge retention
The maker tests the steel on a CATRA-type cutting machine. In its test of 24 April 2026, 10Cr15CoMoV cut 116.5mm of card on its first three strokes (initial cutting performance) and 527.7mm over 60 strokes (total card cut). The pass marks in the knife standard ISO 8442-5 are 50mm and 150mm. This is the maker's own test, not an independent one.
In our own kitchens, an S4 edge stays sharp for about three months of home cooking, honed weekly, before it needs the whetstone.
Quality
Every knife is inspected and paper-cut tested before it leaves the maker.
Where they're made
Made for us in Yangjiang, Guangdong, the centre of China's knife industry, by a specialist Damascus maker we have worked with since 2024. We don't publish the maker's name.
Looking after it
Hand wash and dry straight away; never the dishwasher. Hone it weekly, and take it to the Season Whetstone (1000/6000 grit) every few months. Questions we haven't answered here: ask any of our four shops, or email us, and we'll find out.
Shop the S4 range, or start with the S4 Chef's Knife, the whetstone and the sharpening guide.